ScaliRo

AI in ScaliRo · from version 1.32

Ask your layout.

An assistant right inside the Editor, an MCP interface for your own AI, and documentation that answers back. The AI takes the clicking off your hands. How many robots you need is still worked out by the simulation.

ScaliRo AI Assistant · Demo layout
Ask about this project...

Example illustration

What is AI in ScaliRo?

Three ways in. One project.

AI in ScaliRo is not an add-on product. It is three ways into the same project data: the assistant in the Editor, the MCP interface for your own AI, and the docs AI. Use exactly the one you need.

What is MCP? The Model Context Protocol is an open standard that lets AI assistants work with software. A ScaliRo project offers its tools through it: read and change the layout, check patterns, create flows, control the simulation.

Assistant in the Editor · from 1.32 · early access

Your assistant for
the clicking.

It works in the project you have open. You describe what you need in one sentence. It proposes, you approve.

◰3 transfer stations selected
Do all transfer stations follow the same pattern as these three?
AssistantRead selection
From your selection I derive three rules. I will check all 14 transfer stations against them.
AssistantCheck pattern
3 of 14 deviate: Transfer 05, 10 and 13 are outside the X offset tolerance.

You mark three, it finds the rest. No typing IDs.

ScaliRo Editor · LayoutAI Assistant
01 02 03 04 05 06 07 08 09 10 11 12 13 14
Derived rules X offset 250 mm ± 5Y offset 0 mm ± 5Orientation 90° 3 deviations
Align those three.
AssistantApply pattern
Here is my proposal. Nothing changes until you approve.
Done. All three changes sit in the history as one step.

Proposal, approval, one undo step.

ScaliRo Editor · ApprovalAI Assistant
Approve this change? 3 stations
  • Transfer 05 · X offset 257 mm250 mm
  • Transfer 10 · X offset 257 mm250 mm
  • Transfer 13 · X offset 257 mm250 mm
Approve Allow for this chat Decline
Ctrl+Zreverts all of it in one step
◰27 nodes selected
Renumber the marked nodes into the 200000 range.
AssistantEdit properties
After your approval: 27 nodes renumbered, as one undo step.

Hundreds of properties at once, one approval.

ScaliRo Editor · NodesAI Assistant
OldNew
Node 9931 209931
Node 9932 209932
Node 9933 209933
Node 9940 209940
Node 9941 209941
Node 9942 209942
… and 21 more
When a load is ready at Transfer 03, send a mission there after 30 seconds.
AssistantCreate & connect flow
Flow created: Wait for Variable Change, Delay (30 s) and Create Mission, connected and laid out. Review it in the Flow Editor.

Logic in one sentence, laid out in the Flow Editor.

Logic · Flow EditorAI Assistant
Start Wait for Variable Change Variable Type Entity Trigger On Initial Value false Value Delay Duration 00:00:30 Create Mission Mission Plan AGV Priority AGV Pool Task Mission Exit Load ready Transfer 03 Mission Plan Literal Mission Plan Resupply 03 Mission Plan
Make the station 200 mm wider.
AssistantRead selection
Which station do you mean? Two are selected.
Transfer 04Transfer 11Both
Transfer 04
Got it. The proposal for Transfer 04 is ready for your approval.
Approve Decline
AssistantEdit properties
Done: Transfer 04 is 200 mm wider. One step, undo with Ctrl+Z.

When a request is ambiguous, it asks back, with answer options.

ScaliRo Editor · QuestionAI Assistant

Example illustration

Knows your selection

Mark instead of typing IDs. “These three” is context enough.

Rules first

It proposes rules with tolerances, you confirm, then it checks.

Many changes, one step

Hundreds of properties at once. One Ctrl+Z reverts it all.

Asks back

If a request is ambiguous, it asks instead of guessing.

How to start:
  1. An admin switches the AI Assistant on for the project
  2. Set the allowed models in the Portal
  3. Open the “AI Assistant” panel in the Editor

From sentence to change

Propose first.
Then approve.

The assistant shows every change as a card first. Only your approval writes it into the project, and one Ctrl+Z takes it back as a whole.

1In the chat

Describe

You say in one sentence what should change.

Align the three that deviate.

2In the Editor

Proposal as a card

Every planned change is listed on its own, old and new side by side.

Approve this change? Transfer 05 · 257 → 250 mmTransfer 10 · 257 → 250 mmTransfer 13 · 257 → 250 mm

3Your decision

Approve or decline

Once approved, everything lands in the history as one step.

Transfer 05 applied Transfer 10 applied Transfer 13 applied

Example illustration

Terminal · Claude Code
› Simulate one 8 h shift at 10x, then pause.
⏺ scaliro_get_project_overview
Demo layout · 14 transfer stations · 6 AGVs
⏺ scaliro_control_simulation Start · 10x · until 08:00:00
Simulation running
⏺ scaliro_get_simulation_status
Paused · simulated time 08:00:00
Done: the shift has run through and the simulation is paused.

Example illustration

MCP interface · from version 1.32

Your AI.
Your tools.

Every ScaliRo project offers its tools over MCP. Your own AI environment can then work directly in the running project, with the same tools as the assistant in the Editor.

  • The same toolboxRead and change the layout, check patterns, create flows, start, pause and stop the simulation.
  • A key just for MCPAdmins create API keys of type MCP. They work only on /mcp, expire after one year at most, and act with the rights of the person who created them.
  • Off until you switch it on/mcp only answers once the AI Assistant is enabled in the project.
Claude CodeCodex & other MCP clients
Scaliri · docs.scaliro.com

ASCII and binary DXF. Use meters or millimeters as drawing units and set the origin to 0,0. Polylines with varying start and end width are not supported.

  • DXF Import › DXF File Requirements
  • DXF Import › Importing DXF Files

Example illustration · answer based on the docs page “DXF Import”

Docs AI · with your ScaliRo license

Ask the documentation.

The same AI sits in our documentation as its search. It answers in your words, names its sources, and says when something is not in there.

  • Questions in your wordsAsk the way the question comes up in the project, instead of clicking through pages.
  • With sourcesEvery answer points to the pages it came from.
  • Honest about gapsIf something is not in the documentation, it says so instead of making something up.

Security

You decide what
the AI may do.

Which models may run is set in the Portal: for the whole organization, a space or a single project.

Off until you switch it on

Assistant and MCP interface stay off until an admin enables the AI Assistant for the project.

Only after approval

Every change appears as a card to approve. One Ctrl+Z reverts it as a whole.

Your rights, nothing more

The assistant only changes what your role allows. Without write access it stays read-only.

No training on your data

Requests go through our own server in Nuremberg and only from there to OpenAI. OpenAI does not use API data for training.

How to get started.

Where you work with the AI

In the Portal Today

The Portal runs in your browser, with nothing to install. Projects you open there have the AI assistant in the Editor; you set which models are allowed in the Portal.

In the Hub Coming next

The Hub is our desktop app: you work on your projects locally on Windows. The AI assistant is coming there next; it will need an internet connection.

With your own AI Today

Over MCP your client connects to any instance from version 1.32: in the Portal and on the desktop with the Hub, with no extra settings, once the AI assistant is enabled in the project.

Early access: be one of the first.

Try the AI assistant in your own projects and tell us what is missing. Your feedback shapes how we make building simulations even faster.

Request early access
AI Assistant From version 1.32

In early access: write to us and we will enable it for your project.

MCP interface From version 1.32

Enable the AI Assistant in the project, connect your client. In the Portal with an MCP key, on the desktop without one.

Docs AI With your license

On docs.scaliro.com, signed in with your Portal account.

Open the docs

FAQ

Does the AI work out how many robots I need?

No. That stays the job of the simulation. The assistant can start and pause a simulation, but it does not evaluate it. It takes the layout work before that off your hands: checking, aligning, renumbering, building logic.

Does the assistant change anything without asking?

No. Every change first appears as a card with “Approve”, “Allow for this chat” and “Decline”. “Allow for this chat” only lasts until you clear the conversation, close the project, or switch it off above the input.

What is the difference between the assistant and MCP?

The assistant lives in the Editor and sees your selection. With MCP you use the same tools from your own AI environment, such as Claude Code or Codex. That suits developers, scripts and recurring routines.

Can the assistant build logic too?

Yes. It creates flows, adds Flow Units, connects and lays them out. You review the result in the Flow Editor.

Which AI models are behind it?

In the Editor, current models from OpenAI. Which of them may run is set in the Portal per organization, space or project. With MCP you bring your own AI.

Is my project data used for training?

No. Requests go through our own server in Nuremberg and only from there to OpenAI. OpenAI does not use API data for training.

What if an answer is wrong?

It can happen, which is why it says so below the input: check anything that matters. With thumbs up or down you tell us what was missing.

Your layout.
Your questions.

Already working with ScaliRo? Write to us and we will enable the assistant for your project in early access.